| CBIORBD_NAMESPACE::internal_forces::actuator::Actuator | Class Actuator |
| CBIORBD_NAMESPACE::internal_forces::actuator::ActuatorConstant | Class ActuatorConstant is a joint actuator type which maximum is contant |
| CBIORBD_NAMESPACE::internal_forces::actuator::ActuatorGauss3p | Class ActuatorGauss3p is a joint actuator type which maximum is 3 parameter gaussian (Gauss3p) Please note that all parameters are given in degrees |
| CBIORBD_NAMESPACE::internal_forces::actuator::ActuatorGauss6p | Class ActuatorGauss6p is a joint actuator type which maximum is bimodal 6 parameter gaussian (Gauss6p) Please note that all parameters are given in degrees |
| CBIORBD_NAMESPACE::internal_forces::actuator::ActuatorLinear | Class ActuatorLinear is a joint actuator type that linearly evolves |
| CBIORBD_NAMESPACE::internal_forces::actuator::ActuatorSigmoidGauss3p | Class ActuatorSigmoidGauss3p is a joint actuator type which maximum is 3 parameter gaussian (Gauss3p) Please note that all parameters are given in degrees |
| CBIORBD_NAMESPACE::internal_forces::actuator::Actuators | Class holder for a set of actuators |
| CBIORBD_NAMESPACE::utils::Benchmark | Collection of method to supercifically benchmark the code |
| CRigidBodyDynamics::Body | |
| CBIORBD_NAMESPACE::rigidbody::SegmentCharacteristics | Characteristics of a segment, namely the mass, the center of mass, the inertia, the length and its mesh geometry |
| CBIORBD_NAMESPACE::internal_forces::muscles::Characteristics | Class Holds that muscle characteristics |
| CBIORBD_NAMESPACE::internal_forces::Compound | Class compound is a very generic definition of what a muscle is. It should be the base class of every muscles |
| CBIORBD_NAMESPACE::internal_forces::ligaments::Ligament | Base class of all ligament |
| CBIORBD_NAMESPACE::internal_forces::ligaments::LigamentConstant | Base class for ligament constant |
| CBIORBD_NAMESPACE::internal_forces::ligaments::LigamentSpringLinear | Class LigamentSpringLinear is a ligament with same behavior than linear spring defined by: k(l-l0) with k is the stiffness |
| CBIORBD_NAMESPACE::internal_forces::ligaments::LigamentSpringSecondOrder | Class LigamentSpringSecondOrder is a ligament with same behavior than second order spring defined by: (k/2) * ((l-l0) + sqrt((l-l0)*(l-l0) + epsilon*epsilon)) with k is the stiffness and espilon a small parameter to avoid negative values. https://ieeexplore.ieee.org/abstract/document/6755458 |
| CBIORBD_NAMESPACE::internal_forces::muscles::Muscle | Base class of all muscle |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillType | Base class for all HillType muscles |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillDeGrooteType | Muscle based on DeGroote 2016 https://link.springer.com/article/10.1007%2Fs10439-016-1591-9 |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillDeGrooteActiveOnlyType | Muscle of Hill type augmented by Thelen (https://simtk-confluence.stanford.edu/display/OpenSim/Thelen+2003+Muscle+Model) |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillDeGrooteTypeFatigable | Add a fatigue model to the HillDeGroote type Note that useful defaults values for the FatigueParameters characteristics are: fatigueRate = 0.01 recoveryRate = 0.002 developFactor = 10 recoverFactor = 10 |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillThelenType | Muscle of Hill type augmented by Thelen https://simtk-confluence.stanford.edu/display/OpenSim/Thelen+2003+Muscle+Model |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillThelenActiveOnlyType | Muscle of Hill type augmented by Thelen (https://simtk-confluence.stanford.edu/display/OpenSim/Thelen+2003+Muscle+Model) |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillThelenTypeFatigable | Add a fatigue model to the HillThelen type Note that useful defaults values for the FatigueParameters characteristics are: fatigueRate = 0.01 recoveryRate = 0.002 developFactor = 10 recoverFactor = 10 |
| CBIORBD_NAMESPACE::internal_forces::muscles::IdealizedActuator | Muscle that has a constant maximal force |
| CRigidBodyDynamics::ConstraintSet | |
| CBIORBD_NAMESPACE::rigidbody::Contacts | Class Contacts |
| CBIORBD_NAMESPACE::Model | The actual musculoskeletal model that holds everything in biorbd |
| CBIORBD_NAMESPACE::utils::Error | Raise error or warning while biorbding |
| CBIORBD_NAMESPACE::rigidbody::ExternalForceSet | An External force set that can apply forces to the model while computing the dynamics |
| CBIORBD_NAMESPACE::internal_forces::muscles::FatigueModel | Class Fatigue model of a muscle |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillDeGrooteTypeFatigable | Add a fatigue model to the HillDeGroote type Note that useful defaults values for the FatigueParameters characteristics are: fatigueRate = 0.01 recoveryRate = 0.002 developFactor = 10 recoverFactor = 10 |
| CBIORBD_NAMESPACE::internal_forces::muscles::HillThelenTypeFatigable | Add a fatigue model to the HillThelen type Note that useful defaults values for the FatigueParameters characteristics are: fatigueRate = 0.01 recoveryRate = 0.002 developFactor = 10 recoverFactor = 10 |
| CBIORBD_NAMESPACE::internal_forces::muscles::FatigueParameters | Class FatigueParameters that holds the muscle fatigue parameters |
| CBIORBD_NAMESPACE::internal_forces::muscles::FatigueState | Base class for Fatigue states models |
| CBIORBD_NAMESPACE::internal_forces::muscles::FatigueDynamicState | Class A state of fatigue that dynamically evolves over the usage of the muscle |
| CBIORBD_NAMESPACE::internal_forces::muscles::FatigueDynamicStateXia | Implementation of Xia (https://www.sciencedirect.com/science/article/pii/S0021929008003692) dynamic fatigue model |
| CBIORBD_NAMESPACE::internal_forces::Geometry | Class Geometry of the muscle |
| CBIORBD_NAMESPACE::internal_forces::muscles::MuscleGeometry | Class muscle geometry of the muscle |
| CBIORBD_NAMESPACE::utils::IfStream | Wrapper for the an std::ifstream with increased capacities |
| CBIORBD_NAMESPACE::rigidbody::IMUs | Hold a set of IMUs |
| CBIORBD_NAMESPACE::Model | The actual musculoskeletal model that holds everything in biorbd |
| CBIORBD_NAMESPACE::rigidbody::KalmanParam | Parameters of the reconstruction |
| CBIORBD_NAMESPACE::rigidbody::KalmanRecons | Class Kinematic reconstruction algorithm using an Extended Kalman Filter |
| CBIORBD_NAMESPACE::rigidbody::KalmanReconsIMU | Class Kinematic reconstruction algorithm using an Extended Kalman Filter for IMU |
| CBIORBD_NAMESPACE::rigidbody::KalmanReconsMarkers | Class Kinematic reconstruction algorithm using an Extended Kalman Filter using skin markers |
| CBIORBD_NAMESPACE::internal_forces::ligaments::LigamentCharacteristics | Class Holds that ligament characteristics |
| CBIORBD_NAMESPACE::internal_forces::ligaments::Ligaments | Ligament holder |
| CBIORBD_NAMESPACE::rigidbody::ExternalForceSet::LocalForcesInternal | This is an internal structure holding the information for the local forces. RotoTransNodes could have suffised, but we need to have a structure that was holding the spatial vector as well |
| CBIORBD_NAMESPACE::rigidbody::Markers | Holder for the marker set |
| CBIORBD_NAMESPACE::Model | The actual musculoskeletal model that holds everything in biorbd |
| CRigidBodyDynamics::Math::Matrix2d | |
| CBIORBD_NAMESPACE::utils::Matrix2d | A wrapper for the Eigen::MatrixXd |
| CRigidBodyDynamics::Math::Matrix3d | |
| CBIORBD_NAMESPACE::utils::Matrix3d | A wrapper for the Eigen::MatrixXd |
| CBIORBD_NAMESPACE::utils::Rotation | Rotation matrix |
| CRigidBodyDynamics::Math::Matrix4d | |
| CBIORBD_NAMESPACE::utils::RotoTrans | Homogenous matrix to describe translations and rotations simultaneously |
| CBIORBD_NAMESPACE::utils::RotoTransNode | A RotoTrans which is attached to a segment |
| CBIORBD_NAMESPACE::rigidbody::IMU | Class IMU |
| CRigidBodyDynamics::Math::MatrixNd | |
| CBIORBD_NAMESPACE::utils::Matrix | A wrapper for the Eigen::MatrixXd |
| CBIORBD_NAMESPACE::rigidbody::Mesh | A class that holds the geometry of a segment |
| CBIORBD_NAMESPACE::rigidbody::MeshFace | The face of the mesh |
| CRigidBodyDynamics::Model | |
| CBIORBD_NAMESPACE::rigidbody::Joints | This is the core of the musculoskeletal model in biorbd |
| CBIORBD_NAMESPACE::Model | The actual musculoskeletal model that holds everything in biorbd |
| CBIORBD_NAMESPACE::internal_forces::muscles::MuscleGroup | A muscle group is muscle that share parents for both origin and insertion |
| CBIORBD_NAMESPACE::internal_forces::muscles::Muscles | Muscle group holder |
| CBIORBD_NAMESPACE::utils::Node | A node is an abstract element which is assigned to a parent |
| CBIORBD_NAMESPACE::rigidbody::Segment | Description of a segment |
| CBIORBD_NAMESPACE::utils::RotoTransNode | A RotoTrans which is attached to a segment |
| CBIORBD_NAMESPACE::utils::Vector2d | Wrapper around Eigen Vector2d and attach it to a parent |
| CBIORBD_NAMESPACE::utils::Vector3d | Wrapper around Eigen Vector3d and attach it to a parent |
| CBIORBD_NAMESPACE::internal_forces::ViaPoint | Via point of a muscle |
| CBIORBD_NAMESPACE::internal_forces::WrappingObject | Base class for the wrapping objects |
| CBIORBD_NAMESPACE::internal_forces::WrappingHalfCylinder | Half cylinder of infinite length (the length only affect the graphical representation) object that makes the muscle to wrap around |
| CBIORBD_NAMESPACE::internal_forces::WrappingSphere | Sphere object that makes the muscle to wrap around |
| CBIORBD_NAMESPACE::rigidbody::NodeSegment | A point attached to a segment, generally speaking a skin marker |
| CBIORBD_NAMESPACE::rigidbody::SoftContactNode | A point attached to a contact node, generally speaking a skin marker |
| CBIORBD_NAMESPACE::rigidbody::SoftContactSphere | A point attached to a contact node, generally speaking a skin marker |
| CBIORBD_NAMESPACE::internal_forces::WrappingHalfCylinder::NodeMusclePair | Pair of 2 muscles points |
| CBIORBD_NAMESPACE::internal_forces::passive_torques::PassiveTorque | Class PassiveTorque |
| CBIORBD_NAMESPACE::internal_forces::passive_torques::PassiveTorqueConstant | Class PassiveTorqueConstant is a joint passive torque type which maximum is contant |
| CBIORBD_NAMESPACE::internal_forces::passive_torques::PassiveTorqueExponential | Class PassiveTorqueExponential is a joint passive torque type that linearly evolves passive torque is defined by :(B1 * np.exp(k1 * (q-qmid)) + B2 * np.exp(k2 * (q-qmid))) * (1-p_beta*qdot/(s_v*omega_max)) * (q[0] - delta_p) + tau_eq from : https://pubmed.ncbi.nlm.nih.gov/31000347/ |
| CBIORBD_NAMESPACE::internal_forces::passive_torques::PassiveTorqueLinear | Class PassiveTorqueLinear is a joint passive torque type that linearly evolves Linear passive torque define by : mx+b |
| CBIORBD_NAMESPACE::internal_forces::passive_torques::PassiveTorques | Class holder for a set of passive torques |
| CBIORBD_NAMESPACE::utils::Path | Collection of methods to manipulate path |
| CBIORBD_NAMESPACE::internal_forces::PathModifiers | Holder of all the path modifiers of a muscle |
| CBIORBD_NAMESPACE::utils::Range | Class Range |
| CBIORBD_NAMESPACE::Reader | Reader for bioMod files |
| CBIORBD_NAMESPACE::rigidbody::RotoTransNodes | Hold a set of RotoTransNodes |
| CBIORBD_NAMESPACE::Model | The actual musculoskeletal model that holds everything in biorbd |
| CBIORBD_NAMESPACE::rigidbody::SoftContacts | Holder for the biorbd contact set |
| CBIORBD_NAMESPACE::Model | The actual musculoskeletal model that holds everything in biorbd |
| CRigidBodyDynamics::Math::SpatialTransform | |
| CBIORBD_NAMESPACE::utils::SpatialTransform | Wrapper of the SpatialTransform (rotation and translation) |
| CRigidBodyDynamics::Math::SpatialVector | |
| CBIORBD_NAMESPACE::utils::SpatialVector | Wrapper of the Eigen::Matrix<double, 6, 1> or Casadi::MX(6, 1) |
| CBIORBD_NAMESPACE::internal_forces::muscles::State | EMG holder to interact with the muscle |
| CBIORBD_NAMESPACE::internal_forces::muscles::StateDynamics | EMG with the capability to compute the time derivative |
| CBIORBD_NAMESPACE::internal_forces::muscles::StateDynamicsBuchanan | Time derivative of activation as described by Buchanan (https://www.sciencedirect.com/science/article/pii/S0021929003001520) |
| CBIORBD_NAMESPACE::internal_forces::muscles::StateDynamicsDeGroote | EMG with the capability to compute the time derivative |
| CBIORBD_NAMESPACE::internal_forces::muscles::StaticOptimization | Base class for a Static Optimization algorithm |
| Cstd::string | |
| CBIORBD_NAMESPACE::utils::String | Wrapper around the std::string class with augmented functionality |
| CBIORBD_NAMESPACE::utils::Equation | Strings that are to be interpreted as equation that can be evaluated |
| CBIORBD_NAMESPACE::utils::Timer | Wrapper around timer function in C++ |
| CIpopt::TNLP | |
| CBIORBD_NAMESPACE::internal_forces::muscles::StaticOptimizationIpopt | The actual implementation of the Static Optimization problem |
| CBIORBD_NAMESPACE::internal_forces::muscles::StaticOptimizationIpoptLinearized | The actual implementation of the Static Optimization problem using a linearized approach |
| CRigidBodyDynamics::Math::Vector2d | |
| CBIORBD_NAMESPACE::utils::Vector2d | Wrapper around Eigen Vector2d and attach it to a parent |
| CRigidBodyDynamics::Math::Vector3d | |
| CBIORBD_NAMESPACE::utils::Vector3d | Wrapper around Eigen Vector3d and attach it to a parent |
| CRigidBodyDynamics::Math::Vector4d | |
| CBIORBD_NAMESPACE::utils::Quaternion | |
| CRigidBodyDynamics::Math::VectorNd | |
| CBIORBD_NAMESPACE::utils::Vector | Wrapper of the Eigen VectorXd |
| CBIORBD_NAMESPACE::rigidbody::GeneralizedAcceleration | Class GeneralizedAcceleration |
| CBIORBD_NAMESPACE::rigidbody::GeneralizedCoordinates | Class GeneralizedCoordinates |
| CBIORBD_NAMESPACE::rigidbody::GeneralizedTorque | Class GeneralizedTorque |
| CBIORBD_NAMESPACE::rigidbody::GeneralizedVelocity | Class GeneralizedVelocity |
| CBIORBD_NAMESPACE::Writer | Main class for writer |